Customized Electric Shuttle Kiln For Shuttle Kiln Furnace For
Sanitary Ware
1﹑Applicable material
shuttle kiln is a modular kiln lined with cordierite or ceramic
wool and can be used for first firing, re-firing and decoration
firing.
2﹑Technical specification
| Item | Specification |
| Volume | 0.3～30 m³ |
| Max operating temperature | 200～1700 ℃ |
| Energy | Electric heating, gas or oil |
| Burner | High-speed isothermal (tempering) burner |
| Number of burners | Determined by kiln volume |
| Temperature control method | Automatic or manual temperature control, optional remote control |
| Lining material | Lightweight fiber material or refractory brick masonry |
Structure type | Arch coupons or suspended ceilings, swirling flames, smoke exhaust
under the car or on the rear wall. |
| Applicable material | All kinds of ceramics, refractory materials, grinding wheels,
powder or granular materials, etc. |
3﹑Advantage
1. Intermittent production, suitable for multi-variety and
small-batch production.
2.The light-weight thin-walled kiln wall structure is adopted, and
the inner lining is made of high-temperature light-weight
materials.
3. Loading and unloading is carried out outside the kiln.
4. High-speed isothermal burners are adopted, arranged at different
heights, and high-speed airflow is ejected to make the airflow in
the kiln rotate strongly, and the convective heat transfer effect
is greatly improved. The temperature difference of each point in
the kiln can be controlled within 5 ℃ during the high-temperature
stage. In the low temperature stage, the temperature-adjusting air
is used to increase the amount of flue gas, and the temperature of
the flue gas sprayed into the kiln is adjusted, and the temperature
difference in the kiln is between 5 °C and 10 °C. The heating and
cooling speed is fast,and the firing cycle is short.
5. Appropriate inspection and control instruments can be
configured, and PLC control is adopted to realize fully automatic
operation.
4﹑Patent
With proven engineering knowledge and more than 20 years'
experience we can provide you the right furnace solution.
5﹑Customer Case in China
The first Mobile phone fast charging graphene heat dissipation film
carbonization production line
The first ITO target powder roller furnace continuous production
line in china
6﹑Foreign Customer
7﹑Package and shipment
We will well pack the goods based on the kinds of furnace and
customer's requirement.
